Inflight Multi Press Machine | CT-MPSS

[vc_row][vc_column width=”1/2″][vc_custom_heading text=”FEATURES” font_container=”tag:h2|font_size:45|text_align:left|color:%23441265″ use_theme_fonts=”yes”][vc_column_text]INFLIGHT MULTI PRESS MACHINE | CT-MPSS KEY FEATURES:

• Four exercises in one machine – Decline Bench Press, Flat Bench Press, Incline Bench Press as well as Shoulder Press.
• Simple adjustments make this machine easy to use.
• 2” x 4” flat oval tubing, ¼” dia. 4000 pound cable and 4 ½” pulleys for rugged durability.
• Steel shrouds powder-coated and clear coated for a mar-resistant lustrous finish.
• Standard 200 lb. tiered weight stack is upgradeable in 50 lb. increments to 300 lbs.

OPTIONAL

• Steel shrouds powder coated and clear coated for a mar resistant lustrous finish.
• Standard 200 lb. tiered weight stack is upgradeable in 50 lb.increments to 300 lbs.

[/vc_column_text][/vc_column][vc_column width=”1/2″][vc_empty_space][vc_single_image image=”50486″ img_size=”full” alignment=”center”][/vc_column][/vc_row][vc_row][vc_column][vc_empty_space][/vc_column][/vc_row][vc_row][vc_column width=”1/2″][vc_column_text]FRAME MATERIALS:

All Inflight Fitness exercise equipment is constructed of heavy-duty 11 and 12ga structural tubing with an ASTM rating of A500 grade (minimum mechanical properties of 58,000 PSI ultimate tensile strength and 46,000 PSI yield strength). All flanges are a minimum of ¼” thick. All steel components are machined to a minimum tolerance of +/- .030″.[/vc_column_text][/vc_column][vc_column width=”1/2″][vc_column_text]CONSTRUCTION:

All MIG (metal inert gas) welding is in accordance with the following codes and/or standards: 3:1 AWS, A3.0 Welding Terms and Definitions 3.2 AWS Dl.1-81 Structural Welding Code-Steel 3.2 AWS D9.1 Specifications. All TIG (tungsten inert gas) welding is in accordance with Mil-Std-2219.[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_empty_space][/vc_column][/vc_row][vc_row][vc_column width=”1/2″][vc_column_text]FRAME FINISH:

Each piece of equipment is prepared for powder coating with a high-temperature, high-pressure iron phosphate wash to ensure optimum adhesion of the electrostatically applied TGIC polyester powder. The coating is then baked at 375 degrees F and carefully monitored to ensure complete curing. This coating is scuff resistant and long wearing. Technical summaries are determined using 3.0 -5.0 mil powder film over iron-phosphated, pretreated steel using and conforming with the following test methods: ASTM B5965-96, C ASTM D 3451-93, 13 ULDTOV2 organic coatings.[/vc_column_text][/vc_column][vc_column width=”1/2″][vc_column_text]PADDING AND UPHOLSTERY:

All of our selectorized weight equipment is fitted with black vinyl covered HR molded cushions. The molded cushions have a density of 100 and a durometer of 40-45. The back cushions incorporate lumbar support and the bottom cushions are contoured to provide comfort and proper positioning. This material is long lasting and easy to clean.

However, if you need a custom color, custom pads are available. We use a padding material of 2″ thick crosslinked polyolefin foam, which has extremely low water absorption, excellent weathering properties, and superior physical properties to neoprene or polyurethane type foams. We cover the pad with your choice of “Naugahyde” or “Boltaflex” vinyl.

All pads are top and blind-stitched. Foam is glued to a 3/4″ thick support board, radiused and chamfered for durability.[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_empty_space][/vc_column][/vc_row][vc_row][vc_column width=”1/2″][vc_column_text]BEARINGS:

All pivots rotate on either ABEC-1 precision ball bearings (Load Rating for 1″=2529 pounds), contained in a cast or machined housing or a self-lubricating Oilite bronze bushing in a machined steel housing to provide smooth, quiet movement and precise alignment.[/vc_column_text][/vc_column][vc_column width=”1/2″][vc_column_text]CABLES:

1/4″ diameter, 7 x 19 strand, mil-spec aircraft cable with a black nylon coating. All fittings are stainless steel and swaged to the cable. The cable assembly is rated at a minimum breaking strength of 4200 lbs.[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_empty_space][/vc_column][/vc_row][vc_row][vc_column width=”1/2″][vc_column_text]PULLEYS:

Pulleys are 4 1/2″ diameter fiberglass-impregnated nylon with a precision fit cable groove and 6203 double sealed roller bearings.[/vc_column_text][/vc_column][vc_column width=”1/2″][vc_column_text]WEIGHT PLATES AND DAMPENING:

All Inflight Fitness selectorized equipment feature solid cast steel weight stack plates with a black finish. Self-aligning low friction sleeve bearings surround the guide rods on every weight stack plate. Weight plates are warranted against breakage for the lifetime of the machine. Heavy-duty rubber spacers are used under the weight stack to absorb shock and reduce noise.[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_empty_space][/vc_column][/vc_row][vc_row][vc_column width=”1/2″][vc_column_text]GUIDE RODS:

To ensure quiet operation and low friction movement, all machines are fitted with 1″ diameter floating chrome plated guide rods with rubber cushion plugs on each end.[/vc_column_text][/vc_column][vc_column width=”1/2″][vc_column_text]LANYARD ATTACHED PINS:

All Inflight Fitness selectorized equipment feature weight stack pins that are attached with a coiled self-storing cord to prevent pin removal or loss.[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_empty_space][/vc_column][/vc_row][vc_row][vc_column width=”1/2″][vc_column_text]FASTENERS:

All bolts meet ANSI B18.3 specifications. One-time use aircraft style center-locking nuts are used to ensure attach points remain secure.[/vc_column_text][/vc_column][vc_column width=”1/2″][vc_column_text]HANDGRIPS:

Our handgrips are manufactured from nonabsorbent UV resistant closed cell PVC vinyl foam for comfort, safety and durability.[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_column_text][/vc_column_text][/vc_column][/vc_row]